Grout

Sort by:
« Previous
1 2 3 4 5 ... 6
Next »

general.shop_by_brand

general.shop_all

general.more_from_matkel

general.shop_all

general.most_viewed

general.shop_all
SAVE UP TO $20.00
Daily Deal with

Up to 35% off on our Products

Shop Now
Featured Product
$1999

Frequently Asked Questions

Cement grout is cost-effective for standard floor joints and dry areas, but epoxy grout is more water-, oil-, and heat-resistant. For kitchens, bathrooms, and wet patios in Saudi homes, epoxy usually offers better durability and stain protection. Matkel carries both options so you can choose between economy and high-performance tiling results.
Some cement grouts can crack if joints are unfilled, mixed incorrectly, or exposed to long direct sun and heat cycles. Using a grout suited to Saudi climate, with proper mixing and joint preparation, reduces abnormal expansion and breakdown on patios, pools, and exposed outdoor floors.
Follow the ratio printed on the bag and mix water gradually until smooth and grain-free. After filling joints, allow the grout to cure fully. Light walking is usually safe after about two hours, full load after 24 hours, and avoid water and intense heat for the first two days.
Yes, but the right type matters. Standard cement grout works well for normal few-millimetre joints, while epoxy or fine-particle grouts suit very narrow gaps. For wide voids, apply in multiple layers or use a specialised resin filler to prevent shrinkage, cracking, and weak spots under traffic.
Choose a water-resistant grout rated for wet areas, especially for bathrooms and kitchens. Epoxy is often stronger against moisture and staining, but success also depends on clean, dust-free joints, full filling, and no air pockets. Properly sealed joints stop water reaching the base layer beneath the tile.
Company
Select Display Mode
Company Quotes & Bulk Orders
Individual Shop & Buy Directly