Iron angle

Sort by:
« Previous
1 2 3 4 5 ... 9
Next »

general.shop_by_brand

general.shop_all

general.more_from_matkel

general.shop_all

general.most_viewed

general.shop_all
SAVE UP TO $20.00
Daily Deal with

Up to 35% off on our Products

Shop Now
Featured Product
$1999

Frequently Asked Questions

Popular sizes include 25x25, 50x50, 75x75, and 100x100 mm angles, with thicknesses from 3 to 10 mm. They are commonly used in metal structures, parking areas, gates, and staircases. At Matkel, you can choose the size based on load, member length, and installation location across Saudi cities.
Black carbon steel angle is best for indoor work or after surface treatment. Galvanized angle has a zinc coating that slows rust outdoors. In Riyadh, Jeddah, and Dammam, especially near coastal areas or humid zones, galvanized or painted angle is preferred for exterior surfaces and exposed structural members.
One meter of 50x50x5 mm angle weighs about 3.73 kg. This is estimated from the cross-sectional area multiplied by steel density of 7.85. Actual weight may vary slightly with production source and measured thickness, so use the weight table or material certificate for loading and purchase calculations.
Yes, iron angles can be supplied in approved structural steel grades with factory inspection certificates and certificates of conformity. Before delivery, verify the steel grade, thickness, dimensions, and surface finish, especially for government projects or critical construction work that requires documented compliance with applicable Saudi and international standards.
Choose thickness based on dead load, wind load, service load, and unsupported length between supports. For outdoor structures in Saudi Arabia, consider thermal expansion and use proper welding or bolted connections. Matkel can help select the correct angle size after you share the loads and site location.
Company
Select Display Mode
Company Quotes & Bulk Orders
Individual Shop & Buy Directly