Industrial PVC control cables are typically rated at 450/750 V and are intended for low-voltage control systems, panels, motors, sensors, and signal lines. They should not be used as high-voltage power cables. In Saudi projects, choose conductor size based on operating current, cable run length, voltage drop, and applicable local electrical standards.
Select conductor size and core count based on control current, cable run length, circuit count, and acceptable voltage drop. Common industrial control cables use 1.5 to 2.5 mm² conductors with 1 to 24 cores. For long runs or sensitive equipment, increase conductor size or separate signal and control paths. Matkel offers options for Saudi industrial control panels.
PVC-insulated control cables generally operate continuously from -15°C to +70°C and may tolerate brief higher temperatures. They are not recommended for direct sunlight or continuous exposure to very hot environments. In Saudi factories, especially during summer, install them in shaded cable trays, insulated conduits, or protected routes with adequate ventilation and spacing.
PVC control cable is economical, flexible, and easy to install, making it suitable for indoor use and standard control panels. EPR control cable is better for high temperatures, outdoor routes, and harsh industrial environments because it offers higher heat resistance and stronger chemical resistance. Choose based on installation location, environmental stress, and project budget.
Yes, Matkel provides Saudi VAT invoices and written warranties for PVC-insulated control cables, covering manufacturing defects under stated terms. For project quantities, you can specify the brand, conductor size, core count, length, and site delivery schedule. Always confirm that the cable matches the designer’s specification before installation.