CPVC Pipe Joining Sleeves

Sort by:

general.shop_by_brand

general.shop_all

general.more_from_matkel

general.shop_all

general.most_viewed

general.shop_all
SAVE UP TO $20.00
Daily Deal with

Up to 35% off on our Products

Shop Now
Featured Product
$1999

❓ Frequently Asked Questions

Yes, CPVC sleeves can be used for hot and cold drinking water within the manufacturer’s temperature and pressure limits. Avoid exceeding the maximum operating temperature. Choose the correct size and compression fit for your building network and use CPVC cement certified safe for drinking water.
Use dedicated CPVC cement, not ordinary plastic glue. Clean and dry the surfaces of dust and moisture. Allow the joint to cure according to the manufacturer’s instructions, usually from a few minutes to about an hour depending on heat and humidity. Test slowly for leaks after full set.
CPVC sleeves handle higher temperatures and are commonly used for hot water lines. PVC sleeves are generally better for cold drinking water and often cost less. For Saudi projects, choose based on operating temperature, pressure, and water type, then confirm the fitting size matches your existing pipes.
Common sizes usually cover standard CPVC pipe diameters, often from quarter to four inches depending on the project. Before buying, check the product operating chart for maximum temperature and water pressure. Confirm the sleeve matches the measurement system used in your building, especially for internal networks in Riyadh, Jeddah, or Dammam.
Many suppliers provide warranties when installation follows the correct method, including proper sizing, approved cement, and limits for heat and pressure. If a leak appears, shut off the water, inspect the sleeve and cement, then replace or refit the joint if the adhesive was unsuitable. Matkel lists warranty terms and product details before purchase.
Company
Select Display Mode
Company Quotes & Bulk Orders
Individual Shop & Buy Directly